Description
ROVCE LED Headlight Assembly Upgrade Defender Design Dynamic Lamp for Land Rover Discovery 4/3 2010-2016 DRL Turn Signal Lights
Sign for receipt
You must personally sign and unpack inspection. If others sign for you, try to unpack and inspect the goods face to face.If there is any damage, please contact us in time before unpacking and inspecting the goods，we will investigate the responsibility of the express.The goods damage caused by the failure to sign for inspection shall be borne by the customer, so please pay attention to carefully check before signing for receipt.
About the Gap
Q: Why is there still a gap after the installation of headlight adjustment?
A: The headlight assembly is opened according to the original car mold. There will be a few gaps after the installation of the headlight. The gap is generally 0.3CM from the original headlight.The gap problem can be adjusted in the installation process, if there is a gap in the installation process, should be slowly adjusted, adjusted to the time of the screw slowly fixed but not fixed too tight.When the gap problem is adjusted well, all the screws are fixed.There will be more or less gaps. The original car had a gap. However, it does not affect the usage.
About fog
Q: Why do car appear fog after installation?
A:There may be fog when the new lights are installed,Moisture that assembly materials may contain due to weather,Released in the heat to form fog,In addition, after installing the lamp, washing the car or raining after testing the lamp, the hot air in the lamp is discharged, and the lamp suddenly encounters cold and forms vacuum contraction, which is easy to absorb the water vapor into the fog or water droplets, causing the illusion of water,After installing the bulb, please check whether all the sealing places are well sealed and whether the ventilation hose mouth is installed downward.After loading, please check again to prevent loose during loading. The fog generated after discharging the bad seal will disperse in 15 days. There is no water in this lamp, please rest assured to use it.Headlamp fog is mainly due to the high humidity of the air, resulting in water vapor condensation in the headlamp. At this time, the headlamp fog is a normal phenomenon, the reason for the fog is only related to the humidity of the air, the general headlamp fog condensation water vapor is not a lot, open the headlamp 15 minutes later, these water vapor will evaporate, will not stay in the headlamp. So the headlamp fog does not accept return and change, can be solved by desiccant
Return instructions
If the product is not installed within 15 days due to personal preference, it can be returned, and the freight should be taken by yourself. The product should keep the appearance and outer packaging of the product complete, without any scratches or installation marks.The product is expensive. If it has been installed, it will affect the secondary sales. Return or replacement will not be accepted.
Note:
Model 2011-2013, need to replace the front bumper grille
No need for 2014-2017 models
About AFS Function:
If your car is without AFS, great ！Plug and play directly!!!
If your car is with AFS, please close AFS function, AFS function will disappear and it can be plug and play well.
